1988

1988-1990 Dodge 5.9L Cummins 6B Complete Drop-In Engine

1988-2005 Dodge Ram 5.9L Cummins, all 5 speed & 6 speed non-ETH, holds up to 350hp & 650 ft lbs of torque.

1988-2005 Dodge Ram Cummins, all 5 speed & 6 speed non HO, with 12-1/4" Clutch Conv to 13"- holds up to 375hp & 800 ft lbs of torque

1988-1998 Dodge 12-valve

BD Exhaust 1988-1998 Dodge 12-valve

2x4 & 4x4 F250, F350, E250, & E350- 1986 to present, single rear wheel- Holds 6 quarts

Ford Front Differential Cover fits Dana 50's & Dana 60's, Early 1980 to present, F250, F350, Excursion- Holds 4 quarts

GM 1970 to present 1500 Truck, Suburban 1500 & 2500, Blazer, Vans & some cars- Holds 4 quarts

Semi Floating Axle, GM 1980 to present 2500, 3500, Trucks, Vans, Suburban and more. Must check to confirm Semi Floating Axle, Ring gear bulge on drivers side of center. Holds 5 quarts

Full Floating Axle GM 1973 to present 2500 & 3500. Must check to confirm Full Floating Axle, Ring gear bugle on passenger side of Center, 6 Liter Gas 2500 HD- Holds 6 quarts

1983-1994 Ford 6.9L/7.3L- Airaid Replacement Air Filter

1983-1994 Ford 6.9L/7.3L- Airaid Replacement Air Filter

GDS H1/HX Gasket Set for Turbocharger mounting on 1988-2007 5.9L Dodge / Cummins applications.

CH-02, Upgrade Compressor Housing & Wheel combo (60mm inducer) for 1988-1991.5 Turbochargers. Non-intercooled 1988 to early 1991 require the H1C Outlet Kit and the H1C Inlet Kit.

1988-1993 Dodge Cummins with VE Fuel Pump O-ring and Gasket Included

Holset H1C Turbo Rebuild Kit 4027309 - Dodge Cummins 88-93 and some 1994 models

Application:

• Ford | Dodge | GM w/ Packbrake (see applications below)

Fits:

• Ford 1983-1987 6.9L IDI
• Ford Early 7.3 Powerstroke

Injector Installation Kit

Bosch Stock Injectors 1992 - 1993 Dodge 5.9L Cummins 12V with Factory Intercooler 0432133877 1988 - 1991.5 Dodge 5.9L Cummins 12V Factory Non-Intercooler 043213388 Select Proper Injector for Year

GDS Re-manufactured VE Injection Pump 1988-1993 Dodge Cummins 5.9L