Can You Increase Payload Rating?
Once the power and towing bragging rights are out of the way, trucks are built to haul stuff, and payload rating is the value most often quoted to represent that. But where did that rating come from, and can you do anything to change it?
There’s no doubt you’ve seen comparisons of payload ratings, but they should have many footnotes because there is no detailed industry standard, and ratings change so fast that few are up to date. Truck makers typically define maximum payload as the gross vehicle weight rating (GVWR) minus the truck’s curb weight — and in the case of GM, they use “base option curb weight” to calculate — and payload is composed of passengers and cargo.
Numbers May Vary
From the outset there’s a gray area, as GM and Ram Truck consider all passengers to weigh 150 pounds at each seating position. That seems a bit optimistic to us. Even the FAA is considering raising its 170-pounds-per-person specification of recent years because of potential overloading of small aircraft and the ever-increasing weight of Americans. Transport Canada has proposed 200 pounds for men and 165 pounds for women. Even if we use the 150-pound specification, a half-ton four-wheel-drive pickup with five passengers could easily be left with an effective cargo capacity of just 350 to 750 pounds.
It’s important to note that the payload figures in brochures and on manufacturer websites highlight “best-case” scenarios. The specific truck in question will be fitted with the minimum equipment needed to attain that given rating. Optional parts usually add weight, though there are exceptions, like changing from steel wheels to alloy wheels, an aluminum-block engine rather than iron, smaller mirrors, or deleting the bumper or spare tire. Anything else you add — a hitch, winch, or megawatt stereo — will subtract from your payload rating.
The only way to boost the payload rating is to take weight off the truck: removing the rear seat or bumper, using lighter wheels and/or tires that meet gross axle weight rating requirements, and so on.
Although payload determination may vary by manufacturer, the GVWR and GAWR (gross axle weight rating) on the certification label are standardized and absolute. Only the manufacturer — or an upfitter that started with an incomplete vehicle — can set the GVWR. There’s no wiggle room or fudge factor here; the rating exists because above it, things can and will break. And if you overload the vehicle, a break may also break your wallet because the warranty won’t cover it. Finally, be aware that regulations often treat recreational and commercial use differently.
Gross combined weight rating (GCWR) validation covers things like driveline durability and cooling, while GVWR and GAWR validation covers brakes (we don’t recommend any full-size truck running anywhere near GCWR without trailer brakes), frame, wheel bearings, springs, suspension arms/bushings, steering pumps and gear, tires, and box integrity. Look at the rear axle GAWR on many single-rear-wheel pickups, and you’ll find an odd number that’s exactly twice the maximum load rating for the tires on it.
As a result, you can’t increase your payload, but you can do things to make your truck more comfortable operating at or very near GVWR. Thicker, additional or re-arched spring leafs or wound coils; auxiliary airbags or a complete air suspension swap; and added or thicker anti-roll bars can help control weight better.
Eventhough you can't increase you're vehicles payload rating; you can increase the stability, safety, and ride quality of your truck. An after market air spring, air bag, or air suspension can improve the ride and stability of your truck when hauling or towing a heavy load. We recommend adding an air suspension kit like the AMP-AIR kit made by PACBRAKE. This air suspension or air bag kit is a cost effective way to add the stability, ride, and safety that you're looking for.
© 2019 Copyright Gillett Diesel Service Inc. infused with wisdom. the wize.works framework.